The horizontal trough mixer rotates the S-shaped mixing blade through mechanical rotation, pushing the materials to flip back and forth for uniform mixing. Electrical control is used during operation, and the mixing time can be set. When it arrives, it automatically stops, thereby improving the mixing quality of each batch of materials.

　　This product is used in the pharmaceutical, chemical, and food industries to mix powdered or paste materials, ensuring uniform mixing of different proportions of main and auxiliary materials. This machine is made entirely of stainless steel material, with a small gap between the blades and the barrel body for mixing. There are sealing devices at both ends of the mixing shaft to prevent material leakage. It is widely used in industries such as pharmaceuticals, chemicals, and food, and can also be used for mixing semi-solids.

What are the main components of a horizontal trough mixer?

1. Mixing reducer

　　This reducer is the main transmission structure of the mixer, located on the right side of the machine. During operation, it is driven by an electric motor installed in the machine seat through a triangular belt to drive the worm gear and worm gear, and drives the mixer at a 1:40 speed reduction. The worm gear shaft is hollow and equipped with a fixed key, which allows the mixing blade to be freely installed and removed. There are two circular ring screws installed on the top of the reducer for assembly, disassembly, and installation purposes. The end cover is equipped with a screw for positioning the high-speed mixing blade, which has been adjusted at the factory and generally does not need to be adjusted during use.

2. Mixing tank

　　The mixing tank is U-shaped and made of stainless steel. It is equipped with a stirring blade and is horizontally positioned on the mixing reducer and the feeding reducer.

3. Invert reducer

　　The feeding reducer is located on the left side of the machine to control the positioning angle of the mixing tank. During operation, the electric motor installed in the machine base drives the mixing tank to rotate within a certain angle range through a triangular belt drive worm and worm gear, allowing the mixture to be poured out in one go.

4. Machine base and motor device

　　The base of the horizontal slot mixer is a complete structure, and the electric motor is installed on the movable plates on both sides of the base. The upper and lower parts of the electric motor can be adjusted with screws to ensure a certain degree of elasticity of the triangular belt and maintain power transmission.

5. Electrical control box

　　This control box controls the movement of the machine and is located on the right side of the machine. The transmission of the mixing tank can press the "up" and "down" buttons of the mixing tank. Please note that both buttons cannot be pressed simultaneously.